Main SP Tables-1
D146/D147/D148/D149/D150 2-136 System Maintenance Section
1801 [Relay Motor Speed Adjust]
079
Low ENG [-4.0 to 4.0 / -0.0 / 0.1%/step]
Fine tunes relay motor speed. low speed (Process 73 mm/s, paper exit speed
up 108 mm/s)
080
Mid ENG [-4.0 to 4.0 / -0.0 / 0.1%/step]
Fine tunes relay motor speed. Middle speed (Process 108 mm/s, paper exit
speed up 146 mm/s)
081
Standard ENG [-4.0 to 4.0 / -0.0 / 0.1%/step]
Fine tunes relay motor speed. low peed (Process 146 mm/s, paper exit speed
up 256 mm/s)
1801 [Motor Speed Adj.]
100
Drum Adjust *ENG
[0 or 1 / 1 / 1/step]
0:Off
1:On
Selects ON/OFF of drum motor speed fine tune control.
101
Offset:ColorOpcMot:Standard *ENG [-40 to 40 / 0 / 1step/step]
Sets offset amount of fine tuning drum motor speed
C6003/C5503: 256mm/sec C4503: 186mm/sec C3503/C3003: 146mm/sec
102
Offset:ColorOpcMot:Mid *ENG [-40 to 40 / 0 / 1step/step]
Sets offset amount of fine tuning drum motor speed C6003/C5503/C4503:
108mm/sec C3503/C3003: N/A
103
Offset:ColorOpcMot:Low *ENG [-40 to 40 / 0 / 1step/step]
Sets offset amount of fine tuning drum motor speed
C6003/C5503/C4503/C3503/C3003: 73mm/sec
106
ColorOpcMot:Standard *ENG [-40 to 40 / 0 / 1step]
Fine tunes motor speed
C6003/C5503: 256mm/sec C4503: 186mm/sec C3503/C3003: 146mm/sec
To Next Page
Loading...
