Ricoh D147 - Page 971

Main SP Tables-2-2
D146/D147/D148/D149/D150 2-252 System Maintenance Section
003 Paper Transfer:Low:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:Low:2side *ENG [0 to 995 / 100 / 5%/step]
2478
[Thin:SwitchTimingTrailEdge]
Sets switch timing for paper transfer ampere trailing edge correction per
thickness / line speed / printing sides.
001 PaperTransfer:Standard:1side *ENG [0 to 50 / 0 / 2mm/step]
002 PaperTransfer:Standard:2side *ENG [0 to 50 / 0 / 2mm/step]
003 Paper Transfer:Low:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:Low:2side *ENG [0 to 50 / 0 / 2mm/step]
2483
[Thick1:Bias:BW]
Sets paper transfer ampere per thickness / mode (FC/BW) / line speed / printing
sides.
001 PaperTransfer:middle:1side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 16 /
1-uA/step]
002 PaperTransfer:middle:2side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 13 /
1-uA/step]
003 PaperTransfer:low:1side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 11 /
1-uA/step]
004 PaperTransfer:low:2side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 9 /
1-uA/step]