Paper Feed Unit PB3160
SM 2-27 D146/D147/D148/D149/D150
§ When you lift the machine, hold the correct locations.
§ In particular, do not lift the machine by holding the scanner unit, etc, because this
may cause the machine to deform.
§ Do not put the machine down on the paper feed unit as a temporary resting place.
This may cause the paper feed unit to deform. Always connect the machine and
paper feed unit properly.
3. Pull out the 2nd paper feed tray.
4. Using securing bracket as a screwdriver, fix the machine to the feed unit (spring washer:
screw: M4×10: 1).
5. Attach the securing brackets [A] to two positions on the left and right at the rear of the
machine (screws: 1 each).
To Next Page
Loading...
