Rockwell Automation Publication KNX-SG001H-EN-P - December 2020 137
Kinetix 5300 Single-axis EtherNet/IP Servo Drives
LDC-Series Performance Specifications with Kinetix 5300 Drives
Performance Specifications with Kinetix 5300 (200V-class) Drives
Performance specification data and curves reflect nominal system performance of a typical system with the motor at 40 °C (104 °F) and the drive at 50 °C (122 °F) ambient temperature, and
rated line voltage. For additional information on ambient temperature and line conditions, refer to Motion Analyzer.
Linear Motor
Cat. No.
Maximum Speed
m/s (ft/s)
System Continuous
(1)
Stall Current
A 0-pk
(1) Values represent the range between no cooling (low value) and water cooling (high value).
System Continuous
(1)
Stall Force
N (lb)
System Peak
Stall Current
A 0-pk
System Peak
Stall Force
N (lb)
Linear Motor Rated
(1)
Output
kW
Kinetix 5300 Drives
(2)
(230V AC input)
(2) Drives selected are for motors with no cooling. System current, force, and power ratings can be limited by the drive for air and water cooled motors. In those situations, use a higher power
drive to achieve full-system ratings for air and water cooled motors.
LDC-C030100-DHT
10.0 (32.8)
4.1…6.1 74…111 (17…25) 12.1 188 (42) 0.37…0.55 2198-C1007-ERS
LDC-C030200-DHT 8.1…12.2
148…222 (33…50)
24.3
375 (84) 0.74…1.11
2198-C1015-ERS
LDC-C030200-EHT 4.1…6.1 12.1 2198-C1007-ERS
LDC-C050100-DHT
10.0 (32.8)
3.9…5.9 119…179 (27…40) 11.7 302 (68) 0.59…0.89 2198-C1004-ERS
LDC-C050200-DHT 7.9…11.8
240…359 (54…81)
23.3
600 (135) 1.20…1.79
2198-C1015-ERS
LDC-C050200-EHT 3.9…5.9 11.6 2198-C1004-ERS
LDC-C050300-DHT 11.8…17.7
363…544 (82…122)
35.9
941 (212) 1.81…2.72
2198-C1015-ERS
(3)
(3) Rated peak stall-torque is specified with three-phase operation. To achieve rated peak stall-torque performance with single-phase operation, use catalog number 2198-C1020-ERS.
LDC-C050300-EHT 3.9…5.9 12.0 2198-C1004-ERS
LDC-C075200-DHT
10.0 (32.8)
7.7…11.5
348…523 (78…117)
22.9
882 (198) 1.74…2.61
2198-C1015-ERS
LDC-C075200-EHT 3.8…5.7 11.5 2198-C1004-ERS
LDC-C075300-DHT 11.5…17.2
523…784 (117…176)
35.6
1368 (308) 2.61…3.92
2198-C1015-ERS
(3)
LDC-C075300-EHT 3.8…5.7 11.9 2198-C1004-ERS
LDC-C075400-DHT 15.3…23.0
697…1045 (157…235)
47.4
1824 (410) 3.48…5.22
2198-C1020-ERS
LDC-C075400-EHT 7.7…11.5 23.7 2198-C1015-ERS
LDC-C100300-DHT
10.0 (32.8)
11.1…16.7
674…1012 (152…227)
34.3
1767 (397) 3.37…5.06
2198-C1015-ERS
(3)
LDC-C100300-EHT 3.7…5.6 11.4 2198-C1004-ERS
LDC-C100400-DHT 14.8…22.2
899…1349 (202…303)
45.7
2356 (530) 4.49…6.74
2198-C1020-ERS
LDC-C100400-EHT 7.4…11.1 22.8 2198-C1015-ERS
LDC-C100600-DHT 22.2…33.3 1349…2023 (303…455) 68.5 3534 (794) 6.74…10.11 2198-C2030-ERS
LDC-C150400-DHT
10.0 (32.8)
14.1…21.1 1281…1922 (288…432) 45.2 3498 (786) 6.40…9.61 2198-C1020-ERS
LDC-C150600-DHT 21.1…31.7 1922…2882 (432…648) 67.8 5246 (1179) 9.61…14.41 2198-C2030-ERS
To Next Page
Loading...
Need help?
General
