Sel SEL-787 - Modbus Map Settings (SET M Command); Table 4.69 User Map Register Settings

4.111
Date Code 20150130 Instruction Manual SEL-787 Relay
Protection and Logic Functions
Modbus Map Settings (SET M Command)
Modbus Map Settings (SET M Command)
Modbus User Map
Table 4.69 shows the available settings. See Appendix E: Modbus RTU
Communications for additional details.
DNP Analog Input Label Name 24 characters AI_01 := IBW1_MAG
•
•
•
•
•
•
•
•
•
DNP Analog Input Label Name 24 characters AI_99 := NA
DNP Analog Output Label Name 6 characters AO_00 := NA
•
•
•
•
•
•
•
•
•
DNP Analog Output Label Name 6 characters AO_31 := NA
DNP Counter Label Name 11 characters CO_00 := NA
•
•
•
•
•
•
•
•
•
DNP Counter Label Name 11 characters CO_31 := NA
a
See Appendix D: DNP3 Communications for complete list of the DNP Map Labels and
factory-default settings.
Table 4.68 DNP Map Settings
a
(Sheet 2 of 2)
Setting Prompt Setting Range
Setting Name :=
Fac tory Defau lt
Table 4.69 User Map Register Settings
a
a
See Appendix E: Modbus RTU Communications for a complete list of the Modbus Register
Labels and factory-default settings.
Setting Prompt Setting Range
Setting Name :=
Fac tory De fault
USER REG#001 NA, 1 Modbus Register Label MOD_001 := IAW1_MAG
•
•
•
•
•
•
•
•
•
USER REG#125 NA, 1 Modbus Register Label MOD_125 := NA