Simplex 4010 User Manual

A-2
The 4010 supports IDNet devices as Fire Alarm input and output, as well as four
hardwired output points, and two auxiliary relay output points.
Table A-1 lists the TrueAlarm Hardware Device Types available with the 4010
FACP.
Table A-1. TrueAlarm Hardware Device Types
Device Type Description
PHOTO TrueAlarm photoelectric sensor
SPHOTO TrueAlarm photoelectric sensor with sounder base
RPHOTO TrueAlarm photoelectric sensor with relay base
IPHOTO TrueAlarm photoelectric sensor with isolator base
XPHOTO TrueAlarm extra-sensitive photoelectric sensor
XSPHOTO TrueAlarm extra-sensitive photoelectric sensor with sounder base
XRPHOTO TrueAlarm extra-sensitive photoelectric sensor with relay base
XIPHOTO TrueAlarm extra-sensitive photoelectric sensor with isolator base
ION TrueAlarm ionization sensor
SION TrueAlarm ionization sensor with sounder base
TION True Alarm single station ionization sensor
RION TrueAlarm ionization sensor with relay base
IION TrueAlarm ionization sensor with isolator base
HEAT TrueAlarm fixed temperature heat sensor
SHEAT TrueAlarm fixed temperature heat sensor with sounder base
RHEAT TrueAlarm fixed temperature heat sensor with relay base
IHEAT TrueAlarm fixed temperature heat sensor with isolator base
OHEAT TrueAlarm fixed temperature and rate of rise heat sensor
SOHEAT TrueAlarm fixed temperature and rate of rise heat sensor with sounder base
ROHEAT TrueAlarm fixed temperature and rate of rise heat sensor with relay base
IOHEAT TrueAlarm fixed temperature and rate of rise heat sensor with isolator base
Continued on next page
Hardware Device Types
Overview
TrueAlarm Hardware Device
Types
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Brand	Simplex
Model	4010
Category	Fire Alarms
Language	English