Recording edited pictures as a moving picture
• Digital program editing (on a" Memory Stick" )
Erasing all programs
(1) Select VIDEO EDIT in the menu setting. Turn the SEL/PUSH EXEC dial to
select MEMORY, then press the dial.
(2) Select ERASE ALL. Turn the SEL/PUSH EXEC dial to select EXECUTE, then
press the dial.
All the program marks flash, then the settings are canceled.
To cancel erasing all programs
Select RETURN in step (2).
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
Notes
• Digital program editing does not work with tapes recorded in the Hi8 I'11§/
standard 8 mm [] system.
• You cannot dub the title or display indicators. However, you can dub the title which
has already been recorded on a tape.
• You cannot operate recording during Digital program editing on a" Memory Stick."
• The moving picture files recorded on your ca•corder cannot be played back on other
camcorders without the folder creation function.
You cannot set IN or OUT to the following portions of the tape:
A portion recorded in Ill8 Hill/standard 8 mm [] system
A blank portion of the tape
The total time may not be displayed correctly in the following cases:
Tile tape is recorded in tile Hi8 I'lim/standard 8 mm [] system.
There is a blank portion between IN and OUT on the tape.
While making a program
If you eject the cassette, NOT READY appears on the screen. The program will be
erased.
Recordingfolder
You cannot change the recording folder.
The recording folder you selected when the POWER switch was set to MEMORY is
used (p. 162).
158
To Next Page
