Processing
5-54
20077/021 US XTRA Operator’s Manual
“Send to RS232” Button
Touching the “Send to RS232” button will output the selected case to the RS232 port.
While the case is being transferred, all other buttons will be disabled and the text
“Outputting Case...” will be displayed on the Past Cases Screen.
“View Case” Button
Touching the “View Case” button will display the Tally tab of the Menu screen, with the
tally table populated with data from the selected case. Refer to “Tally Tab” on page
5-44.
3. Close Button
Touching the Close button closes the Past Cases Screen and returns to the previously displayed
screen.
To Next Page
Loading...
