Data Download Option
X
TRA Operator’s Manual 20077/021 US 11-9
XTRA Data Output
Reports may be printed in containing different levels of detail about the case(s):
Reports transferred using one of the data download options (X
TRA USB or RS232) always include all
information (General Report + Bowl Tally + Alarms/Warnings + Modifications).
By default, printed reports include general information about each case: header, setup, totals, and
blank lines for notes. To add additional information to the printout, use the “Add Bowl Tally” and “Add
Alarms & Mods” buttons which are available on the End of Case Screen, Tally Tab of the Menu Screen,
and the Past Cases Screen.
“Add Bowl Tally” Button
Touch the “Add Bowl Tally” button to enable the inclusion of bowl tally data in printed
reports. When enabled, the button will appear inset and green. Touch the button a second
time to disable the inclusion of bowl tally data. Refer to “Bowl tally” on page 11-11 for a
list of information included in reports when the “Add Bowl Tally” button is enabled.
“Add Alarms & Mods” Button
Touch the “Add Alarms & Mods” button to enable the inclusion of event data (such as
alarms and modification of parameters which occurred during the case) in printed
reports. When enabled, the button will appear inset and green. Touch the button a
second time to disable the inclusion of event data. Refer to “Event Data” on page 11-12 for a list of
information included in reports when the “Add Alarms & Mods” button is enabled.
General Report Data
For each case, the following data is recorded to the system’s internal memory and may be exported
using one of the data download options:
Header Information
The header information appears first.
Setup
• General Report: header, setup, totals, blank
lines for notes
• General Report + Bowl Tally
• General Report + Alarms/Warnings +
Modifications
• General Report + Bowl Tally + Alarms/
Warnings + Modifications
•X
TRA software version and serial number • Case number
• Patient ID and other optional identifiers
defined by the operator
• Date (yyyy/mm/dd)
• Time (hh:mm)
• Case type (plasma sequestration or blood
recovery
•Protocol
• Mode • Bowl size
To Next Page
Loading...
