sorin XTRA - Additional Cycle Data

Data Download Option
X
TRA Operator’s Manual 20077/021 US 11-11
Additional Cycle Data
For each cycle of each case, the following data is recorded to the system’s internal memory and may
be exported using one of the data download options by enabling the “Add Bowl Tally” and/or “Add
Alarms & Mods” buttons:
Bowl tally
• Cycle status • Date and time of Fill start
• Date and time of Empty end • Total number of cycle events recorded
• Active protocol • Initial operating mode
• Initial Fill flow speed (ml/min.) • Initial Empty flow speed (ml/min.)
• Initial Wash flow speed (ml/min.) • Initial Spill PPP flow speed (ml/min.)
• Initial Spill PRP flow speed (ml/min.) • Initial Spill PPP volume (ml)
• Initial Spill PRP volume (ml) • Initial Wash volume (ml)
• Initial vacuum status • Initial BQW status (Off/2X/4X)
• Initial Autostart status • Initial Continue status (On/Off)
• Initial Return flow speed (ml/min.) • Initial Concentrate flow speed (ml/min.)
• Initial RBC sensor status (On/Off) • Initial Wash-Empty status (On/Off)
• Processed volume (ml) • PPP collected (ml)
• PRP collected (ml) • RBCs collected (ml)
• Wash volume (ml) • Waste volume (ml)
• Average Hct in (%) • Average Hct out (%)
• Supernatant removal (%) • Waste Line Color indicator
• Return volume (ml) • Concentrate volume (ml)
• Emergency performed during cycle (yes/no)
• Emergency Rapid Transfer performed during
cycle (yes/no)
• Emergency No Wash performed during cycle
(yes/no)
• Double Wash performed during cycle (yes/no)
WARNING
Use of the vacuum pump in INTRA mode while collecting blood
postoperatively might expose the patient to risks of tissue damage.