sorin XTRA - Page 249

Troubleshooting
X
TRA Operator’s Manual 20077/021 US 14-17
Minimum wash
quality might be
already reached
Warning
Based on waste line color
indicator and supernatant
removal algorithm, the wash
quality might be already
acceptable.
• Press WASH to clear the
warning message and display
the wash screen.
• If the waste line is clear, you
may decide to anticipate the
Empty phase by pressing
EMPTY.
• Otherwise, the device will
continue to wash for the
entire preset wash volume.
Min. quality reached
Minimum wash
quality might be
already reached
(when processing
with Pfat protocol)
Warning
Based on waste line color
sensor and supernatant
removal algorithm, the wash
quality might be already
acceptable.
• Press WASH to clear the
warning message and display
the Wash screen.
• If the waste line is clear, you
may decide to anticipate the
Fat Removal phase by
pressing FAT REM.
• Otherwise, the device will
continue to wash for the
entire preset wash volume.
Min. quality reached
Minimum wash
quality might be not
reached yet
Warning
Based on waste line color
indicator and supernatant
removal algorithm, the wash
quality might not be yet
acceptable.
• Press WASH to clear the
warning message and display
the wash screen.
• If you want to manually skip
to the Empty phase, press
EMPTY.
• Otherwise, the device will
continue to wash for an
additional volume
corresponding to 50% of the
preset wash volume and
automatically switch to empty
if compliant.
Min. quality not reached
Message Text
Warning or
Alarm
Buttons Available in the
Button Bar During
Warning/Alarm
Operator Response
Data Management
Text
Table 14-2 List of Warnings and Alarms Which Might Occur During Processing (Continued)