Spectra T200 - Page 110

Chapter 4 — Configuring the Library Configuring the Global System Settings
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
111
Network Settings Set the IP addressing for the LCM Ethernet port. You can
also configure up to two DNS IP addresses for use with the
NTP service. See Configure Network Settings on page 112
for detailed information and instructions.
Note: Depending on how you are accessing the library, the
status bar shows:
 The Network Settings icon when you access the library
using the touch screen or a direct connection to the LCM.
 The library’s name, if set, when you are accessing the
library using the BlueScale web interface through a web
browser connection.
Dynamic
Mail User Configure recipients for emails containing system
messages, traces, and diagnostic results generated by the
library. See Configure Mail Users on page 115 for detailed
information and instructions.
autosupport@
spectralogic.com
Auto Configuration
Save
Click Edit and then enable or disable sending the Auto
Configuration Save file to a previously configured mail
recipient. See Enable Email for the Auto Configuration Save
File on page 117 for detailed information about this option
and instructions for configuring it.
Note: The Auto Configuration Save file is always generated,
regardless of the setting for this option. See Use Automatic
Backup of the Library Configuration on page 144 for
information about the Auto Configuration Save file.
Cleared
(Disabled)
Date And Time See Set the Date and Time on page 119 for detailed
information and instructions for setting the date and time.
Date and time
for the Mountain
time zone (US
and Canada)
Enable Complex
Passwords
Click Edit and then enable of Disable complex passwords
for library users. Complex passwords have the following
requirements:
 Minimum length 12 characters
 Minimum of two characters of each: lower case letters,
upper case letters, numbers, and special characters
 Valid special characters: @`~!#$%^&*()-_=+[]{}\|;:'",.<>/?
 Maximum of three in row of any character
 Cannot reuse any of the previous 24 passwords
 Must be changed every 90 days
Cannot be changed within two days of a previous
password change
Cleared
(Disabled)
Setting Description Default