Chapter 12 — Library Troubleshooting Using BlueScale Hardware Health Monitoring
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
354
View Hardware Health Monitoring (HHM) Data
The advanced utility called HHM: View Data generates a report showing
the current status of the HHM counters. This information includes the
following:
Library serial number and name (if configured)
Information about key library components monitored by HHM,
including the type of reminder generated when the component reaches
its maintenance threshold
Robotics moves: Drive To Drive Moves, Drive To Slot Moves, Slot To
Slot Moves, Slot To Drive Moves, TAP In Moves, and TAP Out Move.
Use the following steps to view the current HHM data.
1. Log into the library as a user with superuser or administrator
privileges.
2. From the toolbar menu, select Maintenance > Tools. The Maintenance
Tools screen displays.
3. Select Utilities. The Utilities screen displays.
4. Click Show Advanced. The Advanced Utilities Confirmation screen
displays.
5. Click Next. The Utilities screen refreshes to show a list of the advanced
utilities.
6. Scroll through the list of advanced utilities and select HHM: View Data.
The screen refreshes to show the details for the utility.
In addition to the HHM: View Data utility, two additional HHM utilities configure the
HHM counters and thresholds for the monitored components. Do not change the
values for any counters or thresholds unless you are specifically instructed to do so
by Spectra Logic Technical Support.
Figure 208 The HHM: View Data utility.
To Next Page
Loading...
