Spectra T200 - Using the Advanced Import;Export Options; Manually Create a Move Queue

Chapter 7 — Importing and Exporting Cartridges Using the Advanced Import/Export Options
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
239
USING THE ADVANCED IMPORT/EXPORT OPTIONS
Overview The Advanced option on the Import/Export TeraPack Cases
screen lets you import a magazine into a specific chamber in a partition or
export a specific magazine from a partition.
Note: If you only need to import or export a single cartridge, you can
also use the options on the Inventory screen (see Chapter 8 –
Using the Cartridge Inventory, beginning on page 246). This
chapter also provides instructions for moving cartridges from
one location to another within a partition.
Requirements When using the advanced import/export options, keep the
following in mind:
 Only a user with superuser or administrator privileges can access the
advanced import/export options.
 Refer to the following sections for additional requirements and restrictions:
 Import and Export Overview on page 222
 Importing into a Storage or Cleaning Partition on page 223
 Exporting or Exchanging Magazines and Cartridges on page 231
Populate the Import/Export move queue using one of the following:
 Manually Create a Move Queue on page 239
 Upload a Move Queue on page 242
Manually Create a Move Queue
1. If you want to import one or more cartridges, place the prepared
cartridges in an empty TeraPack magazine (see Preparing Cartridges
for Use on page 218).
2. Log into the library as a superuser or administrator.
3. From the toolbar menu, select General > Import/Export. The Import/
Export TeraPack Cases screen displays showing the information for the
last partition that was viewed on either the Import/Export TeraPack
Cases screen or the Inventory screen.