Chapter 9 ā Configuring and Using Media Lifecycle Management Using Media Lifecycle Management
December 2019 User GuideāSpectra T200, T380, and T680 Libraries
286
Discover Cartridges Manually
1. Make sure that Media Lifecycle Management is enabled before you
start the discovery process (see Enabling MLM and Configuring Global
Settings on page 276).
2. From the toolbar menu, select Maintenance > MLM. The Media
Lifecycle Management Tools screen displays.
3. Click Discover Media to start the manual discovery process.
Note: If all of the media in the library was previously discovered, the
Discover Media button is grayed out. You do not need to perform
a manual media discovery.
4. Select the partition containing the cartridges you want to add to the
MLM database, then click Next.
Figure 161 Click Discover Media on the MLM Tools screen to
begin configuring a manual media discovery process.
Figure 162 Select the partition containing the cartridges
you want to add to the MLM database.
To Next Page
Loading...
