Spectra T200 - Monitoring Your Library

Chapter 5 — Operating the Library Monitoring Your Library
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
159
4. When you touch the button, the Soft Power Shutdown confirmation
screen displays after a brief delay. Click Continue to power off the library.
MONITORING YOUR LIBRARY
Overview The BlueScale user interface provides a number of tools for
monitoring the health and performance of the library, its components, and
its media. The quickest way to obtain important information is to check the
icons and bar graphs on the General Status screen (see Status Bar on
page 82). They provide at-a-glance information about the status of major
system components and resource usage, respectively. The icons on the
status bar provide additional system-level status information.
The following table lists where to find additional information about the
health and performance of the library, its components, and its media.
Figure 86 The Soft Power Shutdown confirmation screen.
Check... To monitor... For details, see...
System Messages Events that resulted in system
messages about the library and
its operation.
Check and Respond to Messages on page 160
Performance
Metrics
The performance of your
library and its drives.
 View Drive Performance Statistics on
page 163
 View Power Consumption Statistics on
page 165
 View Storage Density Statistics on page 165
Robot Utilization
Information
The percentage of time the
robotics are being used while
the library is powered on.
View Robot Utilization Information on
page 166
Drive Status The operational status,
firmware level, and cleaning
status of the drives.
 View Drive Status Information on page 167
 Using a Global Spare Drive on page 402
BlueScale Vision
Camera
The interior of the library using
the BlueScale vision camera.
Use the BlueScale Vision Camera on page 171