Spectra T200 - Log into the User Interface

Chapter 3 — Introducing the BlueScale User Interface Using the BlueScale User Interface
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
87
Log Into the User Interface
Before you can manage or configure the library, you must log into the
BlueScale user interface.
After the library completes its power-on sequence, the Library
Initialization screen displays. This screen lists the required initialization
steps and current status of the library’s major components (Robotics and
LCM). Text boxes provide descriptions about the currently active tasks.
Notes:  If your library has a static IP address, you can access the
library using the BlueScale web interface (RLC) as soon as the
Library Initialization screen displays
 If the library cannot complete the initialization process, it
generates system messages and enters maintenance mode.
Contact Spectra Logic Technical Support for assistance.
Figure 40 The Library Initialization screen.
Completed task
Active task
Task not started
Task description(s)
Completed task