Spectra T200 - Reset the Drive

Chapter 13 — Drive Troubleshooting Troubleshooting Drives
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
429
The following table lists the Failure ID codes for the TS11xx technology
drives.
Failure ID Code Description Action
5F A function was attempted
which is prohibited due to
the current security
settings.
This code is not related to a drive or microcode
problem. It is related to the operating
environment and requires additional
investigation. Contact Spectra Logic Technical
Support (see Contacting Spectra Logic on page 7).
81-85 Drive problem. Perform the following:
1. If possible, use ITDT to collect a drive dump
file (see Use the IBM Tape Diagnostic Tool
(ITDT) to Retrieve a Drive Dump on page 409).
If you cannot use ITDT, use the BlueScale user
interface to collect a drive trace file (see Use the
Drive Traces Button on page 407).
2. Reset the drive (see Resetting a Drive on
page 401), then retry the operation that
produced the error.
3. If the problem persists, contact Spectra Logic
Technical Support and send the drive trace file
to them, if requested (see Contacting Spectra
Logic on page 7).
Note: The error code clears when you reset or
power cycle the drive.
86 Cartridge or drive
problem.
See Failure ID code FE on page 431.
87 Cartridge problem. See Failure ID code FE on page 431.
8A Drive performance
problem.
Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).
90 Drive problem. Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).
9C Hardware or configuration
problem.
Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).
AA, AB, AC, AD Configuration problem. Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).
AE, AF Hardware problem. Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).
BF Hardware problem. Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).
C1 Drive problem. Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).
D8 Drive problem. Contact Spectra Logic Technical Support
(see Contacting Spectra Logic on page 7).