Chapter 6 — Configuring and Managing Partitions Confirming and Saving the Partition Settings
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
208
CONFIRMING AND SAVING THE PARTITION SETTINGS
After you finish configuring a partition, confirm and save the partition
settings to complete the creation process.
Note: If you want to save the configuration to a USB device, connect
the device to the USB port on the LCM (see Connect a USB
Device to the Library on page 176) and allow time for the device
to mount before continuing.
1. After you complete the configuration screens for the partition as
described in the previous sections, click Next. The Save Library
Configuration screen displays.
2. Select whether you want to save the current library configuration.
Don’t Save Library Configuration — A backup of the changed library
configuration is not saved.
Save Library Configuration To (highly recommended) — Saves a
backup of the library configuration to the selected destination.
Using this option is highly recommended to ensure that you can
easily restore the previous library configuration, if necessary.
Select whether to save the library configuration file to a USB device
or to email it to an already-configured mail recipient (see Configure
Mail Users on page 115).
Note: Do not use the default autosupport@spectralogic.com email
recipient. Spectra Logic does not save emailed configuration files
unless they are specifically requested for troubleshooting.
Figure 124 The Save Library Configuration screen.
To Next Page
Loading...
