Spectra T200 - Edit the Camera IP Address - Black

Chapter 4 — Configuring the Library Setting the Camera IP Address
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
153
Edit the Camera IP Address - Black
1. Click Configuration to see the options for configuring the camera.
2. Select System > General settings. The System General Settings screen
displays.
3. On the System General Settings screen, enter the following information:
 If desired, change the Host name for the camera so that you can
easily identify it. The default hostname is “BlueScale Vision”. This
name displays at the top of the screen. In general, a hostname
should not contain a space.
 Select to Keep current date and time, Synchronize with computer time,
set the time manually, or set the time automatically by entering the
IP address or domain name for an NTP server.
4. Click Save.
Figure 80 The viewing software home page.
Figure 81 Enter a Host name and set the date if necessary.