Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
448
Install the Update Package
Select the BlueScale Package and Update Options
1. Log into the library as a user with superuser or administrator privileges.
2. If you downloaded the BlueScale package to a USB device or if you
plan to update RIM2 controllers using a USB device, connect the USB
device to the LCM’s USB port and allow time for the device to mount
before continuing (see Using a USB Device on page 175).
3. If you receive an error message stating that your disk is full when the
library attempts to unzip a BlueScale package, you need to delete
downlevel packages before you can continue. See Manage Update
Packages on page 458.
4. Select Maintenance > Package Update. The Package Update screen
displays.
Note: If the library notifies you that your BlueScale Software Support
key expired, see Renewing the BlueScale Software Support Key
on page 438.
5. Click Begin Library Update. If the License Agreement screen displays,
read the license agreement, then click Accept.
Note: If you decline the agreement, you are not able to update the
library.
Figure 275 Click Begin Library Update to start the process.
To Next Page
Loading...
