Spectra T200 - Check the Currently Released Bluescale Version; Download the Bluescale Package

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
445
Check the Currently Released BlueScale Version
Follow these steps to check the currently recommended BlueScale version:
1. Log into your user account on the Technical Support portal at
support.spectralogic.com.
Note: See Accessing the Technical Support Portal on page 499 for
information about creating an account and accessing the
Technical Support portal.
2. Select Downloads > Product Software.
3. On the Product Software page, locate your library type in the Spectra
Product column. The currently released BlueScale version is listed in the
Current Version column.
4. Compare the Current Version available for the library to the version
installed on the library.
Download the BlueScale Package
If Auto Download is configured (see Configure a Package Server on
page 137) or your library has Internet access and you plan to download the
BlueScale package directly to the library from the Spectra Logic package
server, skip to Prepare for the BlueScale Package Update on page 446.
If your library cannot access an outside website because of security or
firewall restrictions, use the following steps to download the BlueScale
package from
the Technical Support portal. You can save the BlueScale
package to a USB device or a previously configured package server.
1. Log into your account on the Technical Support portal at
support.spectralogic.com.
Figure 273 The Product Software screen.