Spectra T200 - Manage Update Packages

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
458
Manage Update Packages
The BlueScale packages downloaded to the library reside on the memory
card in the LCM. Over time, the packages (one per update) accumulate on
the card and the library may post an error message notifying you that the
memory card is full. You must delete downlevel packages before you can
continue; you can also choose to delete downlevel packages at other times.
Deleting a package file does not delete the BlueScale software or component
firmware already applied to the library; it simply removes the package file
from local storage on the LCM.
Note: There is no confirmation request before the selected package is
deleted. Make sure that you no longer need access to a package
file before you delete it.
The following steps describe how to delete unwanted BlueScale packages
from the memory card in the LCM.
1. Log into the library as a user with superuser or administrator privileges.
2. From the toolbar menu, select Maintenance > Package Update. The
Package Update screen displays (see Figure 275 on page 448).
3. Click Manage Packages. The Manage Packages screen displays with a list
of all the package files currently stored on the memory card in the LCM.
4. Select the package(s) that you want to delete, then click Delete Selected.
The package delete process begins.
Figure 283 Select the BlueScale packages you want to delete.