Spectra T200 - Export Magazines from a Partition

Chapter 7 — Importing and Exporting Cartridges Exporting or Exchanging Magazines and Cartridges
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
233
 Exporting a magazine directly from the storage pool is not
recommended unless you are exporting all of the magazines from a
partition. This process is often referred to as a “bulk export.”
If you choose to export magazines directly from the storage partition’s
storage pool, be sure to use your storage management software to
update its media inventory after completing the export (see Updating
the Storage Management Software Inventory on page 245).
Export Magazines from a Partition
1. Log into the library as a user with the privileges appropriate to the
location from which you are exporting magazines (see User Privilege
Requirement on page 222).
2. From the toolbar menu, select General > Import/Export. The Import/
Export TeraPack Cases screen displays showing the information for the
last partition that was viewed on either the Import/Export TeraPack
Cases screen or the Inventory screen.
3. Select the partition you want to use from the drop-down list, then click
Go.
The Import/Export TeraPack Cases screen refreshes to show the current
status of the chambers assigned to the selected partition.
Figure 138 Use the Import/Export TeraPack Cases screen to
export or exchange magazines (storage partition shown).