Chapter 9 — Configuring and Using Media Lifecycle Management Using MLM Reporting
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
304
5. Click Save to send the report to the selected destination. Click Previous
to return to the Media Lifecycle Management Report screen without
sending the report.
Override a Poor Cartridge Health Report
Under certain circumstances you may need to override the health of an
MLM-enabled cartridge that is reported as poor (a red health icon appears
next to the cartridge barcode). When the cartridge health is poor, a green
arrow button, that can be used to override the reported health, displays.
During the override process, the library progressively eliminates any
recent hard errors from the tape health calculation. If the health is still red,
all hard errors are eliminated from the tape health calculation. The library
continues to use this adjusted tape health until the cartridge health returns
to either Good or Average as part of the normal health monitoring.
Use the following steps to reset the health of a single cartridge.
1. Display the Media Lifecycle Reports screen as described in Generate
MLM Reports on page 298.
2. Locate the barcode of the cartridge for which you need to reset the
health (see Step 7 on page 302).
Mail Report to The report and attaches it to an email sent to a previously configured mail user.
Use the drop-down list to select the recipient for the report file.
Note: Do not use the default autosupport@spectralogic.com email user. Spectra
Logic does not save emailed MLM report files unless they are specifically
requested for troubleshooting.
Save to USB Save the report to the USB device.
Note: The USB option is only available if you connected a USB device to the
LCM’s USB port before you clicked Save Report on the Media Lifecycle
Management Report screen.
This option... Saves...
Do not reset the cartridge health unless you believe that the reported poor health
is due to drive problems and not the cartridge or you are specifically directed to do
so by Spectra Logic Technical Support.
To Next Page
Loading...
