Chapter 9 — Configuring and Using Media Lifecycle Management Using MLM Reporting
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
303
2. If you want to save the MLM report to a USB device, connect the device
to the LCM’s USB port and allow time for the device to mount before
continuing.
Note: The option to save the report to a USB device is only available if
you connect a USB device to the LCM’s USB port before you click
Save Report on the Media Lifecycle Management Report screen.
3. Click Save Report to display the Save Media Lifecycle Management
Report screen.
4. Select the data to include in the saved report and how you want the
report saved.
Note: If you want to email the report, the intended recipient must be a
previously configured mail user (see Configure Mail Users on
page 115).
Figure 172 Select the desired options on the Save Media
Lifecycle Management Report screen.
This option... Saves...
Report All Media
Lifecycle Data
A report containing all of the available detailed MLM data for MLM-enabled
media in the selected location (a specific partition or the total library).
Note: Depending on the number of cartridges in the selected location, this
report can be quite large.
Report Selected
Data
Only the fields displayed in the report that you selected on the Media Lifecycle
Management Report screen (Figure 170 on page 300).
Note: The headings in the saved report reflect the fields displayed in the
report you selected in the Media Lifecycle Management Report screen.
Zip Report The report as a zip file. Zipping the report is especially useful when emailing
the Report All Media Lifecycle Data report.
Note: If you unzip the report using the standard format used by most file-
zipping applications, the application creates the following directory structure:
*\hard disk\lc\reports.
To Next Page
Loading...
