Spectra T200 - Configuring Optional Library Settings

Chapter 4 — Configuring the Library Configuring Optional Library Settings
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
120
CONFIGURING OPTIONAL LIBRARY SETTINGS
This section describes optional configuration settings that you may select
to use for your library and operating environment.
Manual Time and
Date Settings
(Default)
If not already displayed, the Date and Time screen refreshes to show options
for manually setting the date and time.
1. Use the Date and Time + and – buttons to select the month, day (date), year,
hour, and minute values.
Note: The values in the Date & Time counters do not wrap. For example, to
change the month from December to January, click and hold the – button to
decrement the month.
2. Click Save. Click Previous to return to the System Setup screen.
If you select... Then...
Figure 57 Configure the settings for manually setting the
date and time