Spectra T200 - Log off or Switch Users

Chapter 3 — Introducing the BlueScale User Interface Using the BlueScale User Interface
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
92
5. Click Login. The library’s General Status screen displays.
Note: If you just powered-on or reset the library, there may be a delay
after you click Login while the library completes its initialization.
When the initialization is complete, the General Status screen
displays.
Note:
6. If you want to enable encryption or configure encryption settings or
keys, select Security > Encryption to log into the Encryption feature
(see the Spectra Tape Libraries Encryption User Guide for detailed
instructions).
Log Off or Switch Users
1. If a screen other than the Login screen is displayed, select the Security
toolbar to display the Security options.
2. Select Switch User to log out the currently logged in user and redisplay
the Login screen.
Figure 44 The BlueScale user interface General Status screen.
Figure 45 The Security toolbar.
Security toolbar
Switch User