Chapter 3 — Introducing the BlueScale User Interface Using the BlueScale User Interface
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
91
2. Select the User text box. A cursor appears in the box.
Note: When using the touch screen on the library operator panel,
touch the keyboard icon on the Login screen to activate the soft
keyboard on the library’s touch screen. Use the stylus or your
finger to select fields and to type information using the soft
keyboard.
Touching the keyboard icon again closes the soft keyboard.
3. Type your user name (su is the default user name for a superuser).
See Configuring Library Users on page 96 for information about the
three types of user groups and the options and controls accessible to
each user group.
4. Type your password in the Password text box. If you log in as one of the
default users, there is no password (unless you configured one).
Note: By default, passwords are not required to log into the library. If
you want to password-protect access to the library, set
passwords for each user as described in Configuring Library
Users on page 96.
Figure 43 Log into the library using the Library Controller: Login screen.
Touch the keyboard icon
Touch the icon with the stylus to
switch between letters and numbers.
to open the soft keyboard.
To Next Page
Loading...
