Spectra T200 - Bluescale Vision Camera

Chapter 1 — Library Overview Library Features
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
46
For more information about the drives in the library, see:
 LTO Ultrium Tape Drives on page 20 for a list of documents that
provide information that is applicable to IBM LTO drives.
 TS11xx Technology Drives on page 20 for a list of documents that
provide information that is applicable to TS11xx technology drives.
 Creating a Storage Partition on page 187 for information about creating
storage partitions that use the drives.
 LTO Tape Drive Specifications on page 541 for information about the
transfer rates and storage capacities of LTO drives.
 TS11xx Technology Tape Drive Specifications on page 545 for
information about the transfer rates and storage capacities of TS11xx
technology drives.
 StorageTek T10000 Drives on page 20 for a list of documents that
provide information that is applicable to T10K drives.
 Component Interface Connectors on page 539 for cabling requirements
for host connections to the drives.
BlueScale Vision Camera
The BlueScale Vision camera lets you view the interior of the library while
it is operating. The camera is mounted at the top rear of the library. Two
LEDs illuminate the interior of the library. The camera lets you observe
import and export operations, tape mounts, cartridge moves, and robotic
operations in real time using the browser-based viewer software. The
ability to view the interior of the library without removing the side panels
provides an additional level of monitoring for your library.
For information about using the BlueScale Vision camera, see Use the
BlueScale Vision Camera on page 171.
Figure 17 The BlueScale Vision camera (white camera shown).
Camera lens
Ethernet and
power cables
LEDs (one on each
side of camera)