Chapter 12 — Library Troubleshooting Restoring the Library Configuration
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
382
9. Review the information on the screen and confirm that all settings are
correct for this partition’s configuration.
If the configuration information is correct, proceed to Step 10.
If the configuration information is not correct:
Click Cancel and configure the partition again from the
beginning.
—OR—
Click Previous to move backward through the configuration
screens until you reach the settings that need correction. Make
any necessary corrections, then click Next to move forward
through the screens and return to the Save Partition screen.
10. Click Save. The library requires several minutes to store the
configuration information, after which the Shared Library Services
screen redisplays.
Restore the Library Configuration Using a Saved Configuration
Use the following steps if you want to restore the library from a
configuration backup file that was generated manually, as described in Use
Manual Backup of the Library Configuration on page 144.
Note: The manually-generated configuration backup files do not
include the MLM and DLM databases. If you also need to restore
the MLM and DLM databases, you must use a separately
generated backup of the MLM database (see Restore the MLM
and DLM Databases on page 384).
1. Log into the library as a user with superuser or administrator
privileges.
2. From the toolbar menu, select Maintenance > Tools. The Maintenance
Tools screen displays.
3. Select Utilities. The Utilities screen displays.
4. Click Show Advanced. The Advanced Utilities Confirmation screen
displays.
5. Click Next. The Utilities screen refreshes to show a list of the advanced
utilities.
To Next Page
