Spectra T200 - Creating a Cleaning Partition; Define the Initial Cleaning Partition Settings

Chapter 6 — Configuring and Managing Partitions Creating a Cleaning Partition
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
185
CREATING A CLEANING PARTITION
The following sections describe using the BlueScale partition wizard to
create a cleaning partition for your library. If you know that you want to
use Auto Drive Clean with a storage partition, it is easier to configure the
cleaning partition before you configure the storage partition(s). If you
choose to create the storage partitions before you create the cleaning
partition, Auto Drive Clean is not enabled until you modify the storage
partitions to assign a cleaning partition to them.
Note: If you want to configure the storage partitions first, skip to
Creating a Storage Partition on page 187.
Define the Initial Cleaning Partition Settings
1. Log in as a user with superuser or administrator privileges.
2. From the toolbar menu, select Configuration > Partitions to display the
Shared Library Services screen.
 If one or more partitions are already created, the existing partitions
are listed in alphabetical order. Click New to display the Name and
Media Type screen.
Note: If the New button is not displayed then all chambers in the
library are allocated. You need to delete a partition or edit
an existing partition to free up chambers before you can
create another partition.
Figure 104 Click New on the Shared Library Services screen
to begin creating the cleaning partition.