Spectra T200 - Ce Marking; Fcc Notice; Safety Standards and Compliance

Appendix D — Regulatory & Safety Standards FCC Notice
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
559
FCC NOTICE
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to CFR 47, Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to
correct the interference at the user’s own expense.
CE MARKING
The CE marking has been affixed on this device according to Module A of
decision 768/2008.
Note: To meet CE certification requirements, you must be running
your library on an uninterruptable power supply.
SAFETY STANDARDS AND COMPLIANCE
Product Safety Standards The T200, T380, and T680 libraries comply with
the following domestic and international product safety standards.
 CAN/CSA C22.2 No. 60950-1-03 (Canada: cNemko Mark)
 Electrical Equipment Law (Germany: GS Mark)
 IEC/EN 60950-1, Second Edition
Safety-Relevant Provisions The libraries comply with all safety-relevant
provisions referring to:
 Protection against electrical hazards
 Protection against hazards such as:
 Mechanical hazards
 Fire hazards
 Noise
 Vibration