Spectra T200 - Creating a Cleaning Partition

Chapter 6 — Configuring and Managing Partitions Creating a Cleaning Partition
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
186
 If the library does not currently have any partitions configured,
select Manually create a partition, then click New to display the
Name and Media Type screen.
3. Enter a name for the partition and select LTO Clean or TS11x0 Clean as
the media type.
Important
Do not select the Automatically create a partition option. Doing so configures a
storage partition using the majority of the licensed chambers. You then need to
modify the storage partition to make chambers available for a cleaning partition.
Figure 105 Select Manually create a partition.
Figure 106 The Name and Media Type screen.
For this field... Do the following...
Name
Enter a unique, descriptive name to identify the partition as a cleaning partition.
Names can be any length and can include @ - _ /. and the space character. Partition
names over 32 characters causes a scroll bar to display on some screens and are not
recommended.
Note: The default name for a cleaning partition is “Cleaning n”, where n is a
number. The partition names are listed alphabetically on many of the BlueScale
screens. If you want the cleaning partitions to be listed after the storage
partitions, precede the name with a “z” or “_”.
Media Type Select LTO Clean or TS11x0 Clean to create a cleaning partition.