Spectra T200 - Page 237

Chapter 7 — Importing and Exporting Cartridges Exporting or Exchanging Magazines and Cartridges
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
238
6. Return to the operator panel and click the appropriate option on the
Feedback Required screen.
Note: If you wait more than 10 minutes to respond, the library times
out and displays a message on the operator panel.
Click... If...
Continue You removed the expired cleaning cartridges in the magazines and did not
replace them with new cartridges. Also click Continue if you removed or
exchanged the entire magazine. The process continues as follows:
1. The TAP door closes automatically. If you exchanged magazines, the library
first moves the new magazine into the cleaning partition. It then retrieves the
next magazine from the cleaning partition and delivers it to the second TAP.
The TAP doors alternate as each magazine is retrieved.
Note: If you exchanged cartridges and clicked Continue instead of Override,
click Ok in response to a message stating that the slot containing the exchanged
cartridge should be empty.
2. The process continues as long as there are magazines with expired cleaning
cartridges in the cleaning partition or until you click Stop Exporting on the
Feedback Required screen. Remove the expired cartridges from each
magazine, place the magazine back into the TAP, and click Continue for each
one. When there are no expired cleaning cartridges left in the cleaning
partition, the process stops automatically and the Import/Export TeraPack
Cases screen displays.
Override You exchanged the expired cleaning cartridges in the magazine for new ones.
The process continues as follows:
1. The TAP door closes automatically. The library moves the magazine in the
TAP back to the cleaning partition. It then retrieves the next magazine from
the cleaning partition and delivers it to the second TAP. The TAP doors
alternate as each magazine is retrieved.
2. The process continues as long as there are magazines with expired cleaning
cartridges in the cleaning partition or until you click Stop Exporting on the
Feedback Required screen. Exchange the expired cartridges in each
magazine, place the magazine back into the TAP, and click Override for each
one. When there are no expired cleaning cartridges left in the cleaning
partition, the process stops automatically and the Import/Export TeraPack
Cases screen displays.
Stop Exporting The expired cleaning cartridge you removed or exchanged is the last one you
want to process.