Chapter 4 — Configuring the Library Configuring Optional Library Settings
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
126
5. Click Previous to return to the System Configuration screen.
Trap Destinations Lists all the currently configured trap destinations (IPv4 or IPv6 addresses) to
which the library sends SNMP traps. There are no default trap destinations
configured.
Note: Only one community at a time may contain IPv6 addresses.
Click Edit next to the setting you need to modify. The current settings display
in the corresponding Add/Update section of the screen. Click Save in the
corresponding Add/Update section of the screen after you make your
changes.
Click Delete to remove a setting.
Field Description
To Next Page
Loading...
