Spectra T200 - Use Performance Metrics

Chapter 5 — Operating the Library Monitoring Your Library
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
164
4. Click Go. A screen showing the selected metric displays.
5. Alternatively, you can view the Drive Performance metrics by selecting
Configuration > Drives (or DLM) and then clicking Drive Performance.
Note: The Drive Performance button is not present if Drive Performance
Monitoring is not enabled (see Enable Drive Performance
Monitoring on page 107).
Figure 88 The Drive Performance Monitor screen (Write
Performance for the Total Library shown).
Figure 89 The Drives screen.