Spectra T200 - Page 212

Chapter 6 — Configuring and Managing Partitions Modifying an Existing Partition
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
213
3. If you configured the partition to use encryption or if you want to
enable encryption in a partition that did not previously use it, select
Security > Encryption to log into the encryption feature. The
Encryption User Login screen displays.
a. Type the encryption user password, if one is set. Otherwise, leave
the password blank.
b. Click OK to display the Encryption Configuration screen.
After you log into the encryption feature, you can modify the
encryption settings for the partition (see Select the Encryption Mode
on page 200). You can also configure encryption settings and
manage BlueScale encryption keys. See the Spectra Tape Libraries
Encryption User Guide for detailed information about enabling and
configuring encryption for a partition.
4. From the toolbar menu, select Configuration > Partitions to begin the
partition configuration process. The Shared Library Services screen
displays.
Figure 128 Log into the Encryption feature if you need to
change the encryption setting for the partition.
Figure 129 The Shared Library Services screen.
Select Encryption to
display the Encryption
User Login screen.