Chapter 7 — Importing and Exporting Cartridges Using the Advanced Import/Export Options
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
241
6. Use the Chamber drop-down list to select the source chamber for the
move, then click Go to refresh the screen.
For moves to the TAP from either the entry/exit or storage pool, the
selected chamber is the source for the move. The TeraPack Case
Contents list shows the barcodes for the cartridges in the magazine
in the selected chamber.
For moves from the TAP to either the entry/exit or storage pool, the
selected chamber is the destination for the move. Use the Chamber
drop-down list to select an empty chamber in the selected pool.
7. Click Add Move. An entry listing the move you just defined appears in
the Move Queue list.
For a... Select... To move the magazine from...
Storage
partition
TAP –> Storage The TAP to the selected chamber in the storage pool.
Storage –> TAP The selected chamber in the storage pool to the TAP.
TAP –> EE The TAP to the selected chamber in the entry/exit pool.
EE –> TAP The selected chamber in the entry/exit pool to the TAP.
Cleaning
partition
TAP –> Storage From the TAP to the selected chamber in the cleaning partition.
Storage –> TAP From the selected chamber in the cleaning partition to the TAP.
TAP –> EE
EE –> TAP
For a cleaning partition, the options for moving to or from the entry/exit
pool are not valid.
Figure 142 Add the move to the Move Queue.
Select Add Move to add the
defined move to the Move
Queue.
To Next Page
Loading...
