Chapter 12 ā Library Troubleshooting Resetting Components
December 2019 User GuideāSpectra T200, T380, and T680 Libraries
361
5. Click Show Advanced. The Advanced Utilities Confirmation screen
displays.
6. Click Next. The Utilities screen refreshes to show a list of the advanced
utilities.
7. Scroll through the list of advanced utilities and select Reset Controller.
The screen refreshes to show the details for the utility.
8. Use the drop-down list to select the component identifier for the
controller that you need to reset.
9. Click Run Utility to reset the selected controller.
When the reset is complete, the Utility Results screen displays, showing
that the controller was reset.
Note: When the controller is reset, the library posts system messages
that the F-QIP disappeared and reappeared.
10. The controller is ready for use.
Figure 215 The Reset Controller utility for resetting a RIM.
To Next Page
Loading...
