Spectra T200 - Page 475

Chapter 15 — Maintaining the Drives Updating Drive Firmware
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
476
4. For each drive, click Detail to view information about the current status
of the selected drive, including its firmware version.
5. Make a note of the firmware version the drive is currently using.
Determine Whether an Update is Available
Use the Spectra Logic Technical Support portal to check the currently
recommended firmware version for the drives in your library and
download updated firmware if it is available.
1. Log into your account on the Technical Support portal at
support.spectralogic.com.
Note: See Accessing the Technical Support Portal on page 499 for
information about accessing the Technical Support portal and
setting up an account associated with your library.
2. Select Downloads > Tape Drive Firmware.
Figure 295 Locate the drive firmware version on the Drive
Details screen.
The drive firmware version
Important
Always download drive firmware from the Spectra Logic Technical Support portal
to ensure that the firmware was qualified by Spectra Logic.