Configuration (Cont.)
Enable MLM
Enable Alerts for Non-MLM
Media
Enable Alerts for Load Count
Discrepancies
Minimum Cleaning Passes
Before Warning
Maximum Tape Loads Before
Warning
Enable Media Auto Discovery
Minimum Idle Minutes Before
Auto Discovery
Convert to Broadcast Hours
Override Broadcast Bit Rate
PostScan Blackout Periods
Media Lifecycle Management
Settings
Media Lifecycle
Management
A, S
System Setup—Other Settings
Library Name
Web Server Port
Refresh Rate
Auto Logout Timeout
Drive Performance Monitoring
Power Consumption Monitoring
Enable Automatic Power-Up
After Power Failure
Enable SSL
Enable SNMP Agent
– SNMP Settings
Enable Soft Power
Syslog Server IP Address
BlueScale Vision IP Address
Network Settings
Mail Users
Auto Configuration Save
Date and Time
Enable Complex Passwords
Storage Partition
Storage Pool
– Import
– Export/Exchange
Entry/Exit Pool
– Import
– Export/Exchange (Full Chambers)
– Export/Exchange (Pop. Chambers)
Recycle Encrypted Media
Cleaning Partition
– Import
– Export/Exchange
– Export/Exchange Expired
Rotation Manager
2
Advanced
– Advanced Import/Export
Go to General (Cont.)
General
Import/Export TeraPack Cases
Import/Export
O, A, S
1
Partition Selection
– Drives Status > Drives screen
– Media Status > Inventory screen
Robotics Status
– Run All Motion Basic Tests
– Robot Utilization by Hour
Power Status
Fans Status
TAP (TAP1 and TAP2 for T680)
Power Usage
Density
General Status
General Status
O, A, S
Partition
Source (for media move)
Destination (for media move)
Move Queue (defined moves)
View Source Slot
Find by Barcode
Start Moves (defined moves)
Start in Background (defined moves)
Advanced
– Upload Moves
– Download Inventory
Inventory
Inventory
O, A, S
Maintenance
Package Update
A, S
General (Cont.)
Metric
– Power Consumption
– Drive Write Performance
– Drive Read Performance
– Storage Density
Target
Metrics
Metrics
O, A, S
Media Lifecycle
Management
O, A, S
Media Lifecycle Management
Report
Partition
Report
– Media Health
– Remaining Capacity
– Load Count
– Write Errors
– Cleans Remaining
– Born on Date
– Exported Media
– Last Write Time
– Last Read Time
Save Report
Barcode Filter
Maintenance (Cont.)
Select Profile to Send Log Set
Select Ticket Type
Profile Summary
Confirm and Submit Ticket
Send Log Set
New Profile
Remove
Edit Profile
Manage Profiles
Configure Alarms
Log Forwarding
AutoSupport
A, S
Media Lifecycle Management
Media Lifecycle Management Tools
Discover Media
– Select Partition
Stop Discovery (only visible when
Discover Media is running)
Pause PostScan (only visible when
PostScan is running)
Manual PostScan
Delete MLM Records
Download MLM Database (remote
access only)
Download DLM Database (remote
access only)
S: MLM Media Verification
PreScan
– Enable PreScan
PostScan
– FullScan
4
– QuickScan
6
– QuickScan using Global
Spare
7
– Scan After Time (Days)
– Scan After Write
– Scan After Read
Security
Switch User
O, A, S
Library Users
Users
– Delete
– Edit
Add/Update User
– User
– Password
– User Type
Edit Users
A, S
Encryption User Login
Configure
– Single User Mode
– Multi-User Mode (BlueScale
Encryption Pro only)
2
Spectra SKLM
2
,6
Check Key Files
Import Key
Add Key
– Moniker
Export Key
Delete Key
Encryption Configuration
Encryption
S
Library Controller: Login
Configuration
S: Robotic Control Path
Shared Library Services
New
Summary
Edit
Delete
Global Spare
– Global Spare Usage
S: Spare Drives (Global Spares)
Partitions (Cleaning or Storage)
A, S
Name and Media Type
C/S: Name
C/S: Media Type
S: Advanced
– Emulation
Chambers and Drives
C/S: Storage Chambers
S: EE Chambers
S: Drives
S: Cleaning Partition
Configuration (Cont.)
Drives (DLM)
A, S
Go to Configuration (Cont.)
System
A, S
Hardware ID
Key
– Save
Currently Installed Keys
Drives
Drive Traces
5
Drive Performance
Drive Firmware Update
Drive n
– Add
1
– Remove
1
– Replace
1
– Clean
– Detail
– DLM Report
– Test
– Reset
Controllers
Controllers
A, S
Add
1
Remove
1
Replace
1
Failover
System Setup—Option Enablement
Go to Maintenance (Cont.)
Motion Diagnostics
Utilities
Traces
System Traces
Component Traces
Tools
A, S
Motion Diagnostics List
Previous Results
Diagnostics
A, S
Basic Utilities List
Upload Backup Configuration
Advanced Utilities List
3
– Save MLM Database
– Restore MLM Database
– HHM: View Data
S: Fibre Channel Loop IDs
(Direct-Attached Drives)
S: Drive Visibility
(QIP-Attached drives only)
S: Partition Users
S: Robotic Path Visibility
S: Exporting F-QIP Configuration
(F-QIP or RIM)
Address
Fibre Mode
Go to Configuration (Cont.)
C/S: Save Library Configuration
C/S: Save Partition
S: F-QIP Configuration (additional
F-QIP or RIM if present)
Address
Fibre Mode
Begin Library Update
Manage Packages
Begin Drive Update
Manage Package Servers
Notes:
1) Available at the library’s front panel touch screen only.
2) Only available with a purchased key.
3) Do not use any Advanced Utilities except those listed here unless instructed
to do so by Spectra Logic Technical Support.
4) Requires LTO-4 or later generation or TS11xx Technology drives.
5) Requires LTO-5 or later generation drives.
6) Requires LTO-5 or later generation or TS11xx Technology drives.
7) Requires LTO-5 or later generation Fibre Channel or TS11xx Technology drives.
Library user types: Superuser, Administrator,andOperator
Feature Availability: This feature is available to this user type:
S) Superuser – Controls all aspects of library use, configuration, and security.
A) Administrator – Performs all actions except creating or editing library users,
and accessing encryption.
O) Operator – Performs daily operations (move, import, and export media).
Auto Download Options
S: Encryption
(Encryption user logged in)
– BlueScale
– BlueScale Pro version
2
– Spectra SKLM
2, 6
Status Bar
System Status
System Messages
Refresh
HHM Notification (when maintenance
threshold is reached)
Send AutoSupport Ticket > Send Log Set
Remote Support
BlueScale Vision Camera
(when enabled)
Last Refresh (time and date)
BlueScale Software Version
Network Settings icon (local access)
–OR–
Library Name (remote access)
Auto Download icon
(when package is auto downloaded)
To Next Page
Loading...
