Chapter 4 — Configuring the Library Accessing the System Setup Screen
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
100
Other Settings pane — Used for configuring the operational
parameters for the library.
User Privilege Requirements Only a user with superuser or administrator
privileges can access the System Setup screens to enable new options or
change system configuration settings. See Configuring Library Users on
page 96 for information about the three types of user groups and what
types of privileges each has.
Access the System Setup Screen Use the following steps to access the
System Setup screen when you want to enable a new option or change a
configuration setting.
1. Log into the library as a user with superuser or administrator privileges
(see Log Into the User Interface on page 87).
2. From the toolbar menu, select Configuration > System. The System
Setup screen displays (Figure 47 and Figure 48 on page 100 show the
two panes of the screen).
Figure 48 The Other Settings pane of the System Setup screen.
To Next Page
Loading...
