Symmetricom TimeHub 5500 User Manual

114 TimeHub 5500 User’s Guide 097-55501-01 Revision M – January 2009
Chapter 3 Installing the TimeHub 5500
Making Signal Connections
 The blank panel p/n 093-55599-03 is a double-height blank panel. It covers a
complete output group, including both Output Connector module spaces.
Install the desired Output Connector module blank panels in the back of the
Expansion shelf.
Making Signal Connections
After you install the shelf in the rack, you need to make the following types of signal
connections:
 Shelf to connection panel
 Timing inputs
 Timing outputs
 Communications
 Alarms
Figure 3-13 shows the power, timing input, and communication port connectors on
the rear panel of the shelf.
If you are not installing an Expansion shelf, you do not need to install a Termination
Connector (090-555xx-0x) on both Expansion Link 1 and Expansion Link 2 on the
rear panel of the shelf.

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English