Symmetricom TimeHub 5500 User Manual

097-55501-01 Revision M – January 2009 TimeHub 5500 User’s Guide 95
Chapter 3 Installing the TimeHub 5500
Unpacking the TimeHub 5500
Unpacking the TimeHub 5500
The TimeHub 5500 is packaged to protect it from normal shock, vibration and
handling damage. Care should be taken during unpacking and installation to avoid
damaging the unprotected unit.
1. Unpack all equipment carefully and check it against the purchase order.
2. Inspect the equipment for shipping damage, including bent or loose hardware,
broken connectors, or other visible defects. Notify Symmetricom and the carrier
who delivered the equipment if you suspect that it was damaged in transit.
If any items are missing, contact Symmetricom Global Services.
5
Testing Power Connections, on page 106
6
Installing Modules into the Rear Panel, on page 109
7
Making Signal Connections, on page 114
8
Installing the Cover, on page 125
9
Installing the Management Card, on page 139, including setting the
internal switch
10
Installing the Clock Cards, on page 143, including setting the internal
switch
11
Installing Output Driver Cards, on page 146
12
Installing Expansion Shelves, on page 126
13
Installing Expansion Controller Cards, on page 147
14
Installing Output Connector Modules, on page 128
15
Installing Output Driver Cards, on page 147
Caution: To avoid damage, use proper static control precautions
when handling equipment! Protect the equipment against ESD
(Electrostatic Discharge) by using a grounded protective wrist strap
and normal equipment grounding.
Recommendation: Keep all packaging materials in the event the
shelf or components must be returned or shipped to another location.
Table 3-1. Installation Checklist
Step Procedure Initials

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English