EasyManuals Logo

Symmetricom TimeHub 5500 User Manual

Symmetricom TimeHub 5500
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
130 TimeHub 5500 User’s Guide 097-55501-01 Revision M – January 2009
Chapter 3 Installing the TimeHub 5500
Installing Expansion Shelves
1. Connect one end of cable 060-55505-01 to the Expansion Link 1 connector on
the rear panel of the Master shelf. The connectors are gender-coded to ensure
correct installation.
2. Connect the other end of this cable to the Expansion Link 1 IN connector on the
rear panel of the Expansion shelf.
3. Connect one end of the second 060-55505-01 cable to the Expansion Link 2
connector on the Master shelf.
4. Connect the other end of this cable to the Expansion Link 2 IN connector on the
Expansion shelf.
5. Install a gender changer 128-55505-01 to the Expansion Link 2 OUT connector
on the Expansion shelf.
6. Install the Termination Connectors on the Expansion Link 1 OUT and Expansion
Link 2 OUT connectors.
7. Tighten all connections.
Connecting Multiple Expansion Shelves
You make the connections on the rear panel of the Master and Expansion shelves,
as shown in Figure 3-24. You need two cables (060-55505-01) for each Expansion
shelf, one gender changer (128-55505-01), and two Termination Connectors
(090-55505-01), which are included with the Expansion shelf kit.
1. Connect one end of cable 060-55505-01 to the Expansion Link 1 connector on
the rear panel of the Master shelf. The connectors are gender-coded to ensure
correct installation.
2. Connect the other end of this cable to the Expansion Link 1 IN connector on the
rear panel of the first Expansion shelf.
3. Connect one end of a second cable 060-55505-01 to the Expansion Link 2
connector on the Master shelf.
4. Connect the other end of this cable to the Expansion Link 2 IN connector on the
first Expansion shelf.
5. Connect one end of a third cable 060-55505-01 to the Expansion Link 1 OUT
connector on the first Expansion shelf.
6. Connect the other end of this cable to the Expansion Link 1 IN connector on the
second Expansion shelf.
7. Connect one end of a fourth cable 060-55505-01 to the Expansion Link 2 OUT
connector on the first Expansion shelf.

Table of Contents

Other manuals for Symmetricom TimeHub 5500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Symmetricom TimeHub 5500 and is the answer not in the manual?

Symmetricom TimeHub 5500 Specifications

General IconGeneral
BrandSymmetricom
ModelTimeHub 5500
CategoryData Loggers
LanguageEnglish

Related product manuals