Symmetricom TimeHub 5500 User Manual

097-55501-01 Revision M – January 2009 TimeHub 5500 User’s Guide 203
Chapter 4 Testing and Configuring the TimeHub
Setting the Configuration to Factory Defaults
To set the Output Group Port label for a specific port to null, issue the following TL1
command, substituting the appropriate shelf, group, and port numbers for [1-4],
[A-H], and [1-40] respectively:
INIT-CKTID::S[1-4]-OUT[A-H]-[1-40]:CTAG;
To set all Output Group Port labels to null, issue the following TL1 command,
substituting the appropriate shelf and group numbers for [1-4] and [A-H]
respectively:
INIT-CKTID::S[1-4]-OUT[A-H]:CTAG;

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English