Telit Wireless Solutions WE866E4-P - NMDNS Host Name Registration

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 125 2018-02-16
PRELIMINAR
Y
Synchronous Response
Table 268, page 125, describes the synchronous responses and remarks for Stop NMDNS
Server command.
10.1.2.3 NMDNS Host Name Registration
This command is used for Host name registration in DNS module. Prior to issuing this
command the user is required to issue mDNS start command.
Command Syntax AT+NMDNSHNREGINFO=<Host Name>
Parameter Description
Table 269, page 125, describes the NMDNS Host Name Registration parameters.
Response
Table 270, page 125, describes the responses and remarks for NMDNS Host Name
Registration command.
ERROR If parameter is not valid.
Table 267 Stop NMDNS Server Response
Responses Remarks
Table 268 Stop NMDNS Server Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 269 NMDNS Host Name Registration Parameters
Parameters Mandatory/Optional Value Description
Host Name Mandatory
Value range:1-32
Format: String
Default value:
Telit_Guest
It specifies the Host name that is to be
registered.
Table 270 NMDNS Host Name Registration Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.