WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 32 2018-02-16
PRELIMINAR
Y
Synchronous Response
Table 30, page 32, describes the synchronous responses and remarks for File Length
command.
6.4.5 File List
This command is used to list all the files in the specified path. Prior to issuing this
command, user is required to ensure the file path is present in the Flash.
Command Syntax AT+YFLS=<File Path>
Parameter Description
Table 31, page 32, describes the File List parameters.
Response
Table 32, page 40, describes the responses and remarks for File List command.
ERROR If parameter is not valid.
Table 29 File Length Response
Responses Remarks
Table 30 File Length Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 31 File List Parameters
Parameters Mandatory/Optional Value Description
File Path Mandatory
Value range:
0-100
Format: String
Default value:
N/A
It specifies the file path.
Table 32 File List Response
Responses Remarks
OK Success.
To Next Page
Loading...