Telit Wireless Solutions WE866E4-P - Wi-Fi Antenna Design Guidelines

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 27 2018-02-16
PRELIMINAR
Y
Example ATZ0
OK
6.3.2 Save Profile
This command is used to save the profile to the file system.
Command Syntax AT&WNP=<Profile Number>
Parameter Description
Table 16, page 27, describes the Save Profile parameters.
Response
Table 17, page 27, describes the responses and remarks for Save Profile command.
Example AT&W0
OK
6.3.3 Set Profile
This command is used to set the profile to the specified profile number.
Command Syntax AT&Yn=<Profile Number>
Table 15 Read Profile Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 16 Save Profile Parameters
Parameters Mandatory/Optional Value Description
Profile
Number
Mandatory
Value range: 0-1
Format: Integer
Default value:
N/A
It specifies the profile number to be saved.
Table 17 Save Profile Response
Responses Remarks
SUCCESS Success.
FAILURE Failure.